Accueil > Instructions for use Mille - Mer
USER MANUAL
STARDIVER
Attention :
The helium escape valve of the Bohen StarDiver is automatic. Do not try to unscrew or manipulate it. Failure to comply with this instruction will cancel the warranty of the watch.
Movement winding:
1: Unscrew the crown.
2: Turn the crown clockwise. It takes about 30 turns for the movement to be properly wound.
Setting the date and time:
1: Unscrew the crown.
2: Gently pull out the crown until you feel a "click" indicating the first position (quick date setting position).
3: Turn the crown anti-clockwise until the desired date is displayed.
4: Gently pull the crown out until the second "click" indicating the time setting position.
5: Set the time by turning the crown in either direction.
6: When the operation is complete, gently push the crown back in and screw it back to restore the water-resistance of the watch case.
Setting the band :
To detach the watchband or a link, activate the push button with your fingernail, then slide the component out of the watch case holes (see demonstration video below).
Never force the watch band mechanisms, as this could damage them. Failure to follow this instruction will void the watchband warranty.
Setting the buckle :
The double control buckle of the watch band has 5 increments. Never force the incrementation lever, as this could damage the mechanism. Failure to comply with this instruction will invalidate the warranty of the clasp.
Buckle micro-adjustment:
Press the center button to release the setting. To tighten the adjustment, operate the lever. (See the demonstration below).
Press the side buttons of the clasp when you open it, but also when you close it, in order to avoid forcing the closing mechanism. Failure to comply with this instruction will invalidate the warranty of the clasp.